Solder wick
1.500BD
Out of stock
2.0mm 0.75m Desoldering Braid Solder Remover Wick Cable Wire
Product Details
Condition : New!
Type : CP-2015
Length : 0.75M
Width : 2.0mm
How to use :
1.Place the desoldering wick over the solder to be removed,then puh the heated soldering iron tip onto the desoldering wick.The solder will be absorbed.
2.Remove the desoldering wick after the solder has been absorbed.
3.Cut off the used section of the wick using nippers.
4.Repeat steps 1,2 and 3 if the solder is not removed completely.
Absorbability may differ depending on the type of solder.Sn63% and 60% (tin content) have good absortbability.
Package Included :
1 x 2.0mm 0.75m Desoldering Wick CP-2015
Type : CP-2015
Length : 0.75M
Width : 2.0mm
How to use :
1.Place the desoldering wick over the solder to be removed,then puh the heated soldering iron tip onto the desoldering wick.The solder will be absorbed.
2.Remove the desoldering wick after the solder has been absorbed.
3.Cut off the used section of the wick using nippers.
4.Repeat steps 1,2 and 3 if the solder is not removed completely.
Absorbability may differ depending on the type of solder.Sn63% and 60% (tin content) have good absortbability.
Package Included :
1 x 2.0mm 0.75m Desoldering Wick CP-2015