Solder Wire (Normal)
Non-returnable
BD 1.500
The Best Product to Save Your Time and Money!
Sepcificattion:
Product Name: Solder Wire Reel
Material: 63% SN(Tin) , 37% PB(Lead), 2% Flux
Reel Size(Approx): 5.5 x 2.8cm/2.2" x 1.1" (D*H)
Wire Diameter: 1mm/0.04 Inch
Weight: 104g
Package Content :
1pcs x Solder Wire Reel
- Rosin core tin lead solder wire, tin 63%, lead 37%, flux 2%
- Low melting point: 356 ° F / 356.0 ° F, fast solder, flow smoothly and heat evenly, bright and strong solder point, easy to use.
- Good soldering capacity in both electrical conductivity and thermal conductivity; With the reel of welding cable, welding can be done quickly.
- Wide Application: The rosin core solder cable is designed for electrical repairs such as radios, televisions, VCRs, stereos, cables, motors, circuits and other electronic devices.
- Total size of welding wire roll: 2.2 x 2.2 x 1.1 in.
Sepcificattion:
Product Name: Solder Wire Reel
Material: 63% SN(Tin) , 37% PB(Lead), 2% Flux
Reel Size(Approx): 5.5 x 2.8cm/2.2" x 1.1" (D*H)
Wire Diameter: 1mm/0.04 Inch
Weight: 104g
Package Content :
1pcs x Solder Wire Reel
Choose Quantity
Product Details
Soldering Tips:
1. Heat up the soldering iron.
2. After soldering iron is fully heated, use a wet sponge to softly scrape the tip to remove old solder.
3. Wait seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start.
4. When soldering two components together, place the soldering iron on the part where you want to touch, hold it there for a second.
5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need.
6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint.
7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done.
1. Heat up the soldering iron.
2. After soldering iron is fully heated, use a wet sponge to softly scrape the tip to remove old solder.
3. Wait seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start.
4. When soldering two components together, place the soldering iron on the part where you want to touch, hold it there for a second.
5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need.
6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint.
7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done.